ROCK CANDY High Performance Durable Floor Finish
One Gallon Bottles - 4 per case

STRIP & RE-COAT: (1) Dust mop entire area to be stripped.Remove gum labels and sticky waste with a scraper. (2) Place “Wet Floor” signs around area to be stripped. (3) Dilute recommended stripping solution according to label directions. (4) Liberally apply stripping solution to the floor. Allow product to remain on surface for 6-8 minutes. (5) Manually scrub all corners and edges that the machine cannot reach. (6) Scrub the floor with a machine equipped with appropriate stripping pad or brush. Do not allow stripping solution to dry onto floor. if this occurs, re-wet surface with stripping solution and scrub. (7) Pick up the stripping solution with a wet vac.(8) If a “Rinse Required” stripper was used, liberally apply clean rinse water to area just stripped.Recover with a wet pick up vacuum and proceed to step 9. If a “Rinse Free” stripper is used proceed to step 9. (9) Damp mop area including all corners and edges with clean water. Allow floor to air dry thoroughly.
SCRUB & RE-COAT: (1) Dust mop entire area to be scrubbed.Remove gum labels and sticky waste with a scraper.(2) Place “Wet Floor” signs around area to be scrubbed. (3) Dilute recommended scrubbing solution according to label directions. (4) Liberally apply scrubbing solution to the floor. Allow product to remain on surface for 6-8 minutes.(5) Manually scrub all corners and edges that the machine cannot reach.(6) Scrub the floor with a machine equipped with appropriate stripping pad or brush. Do not allow scrubbing solution to dry onto floor. If this occurs, re-wet surface with scrubbing solution and scrub. (7) Pick up the scrubbing solution with a wet vac. (8) Damp mop area including all corners and edges with clean water. Allow floor to air dry thoroughly.
NOTE: Do NOT apply more than 3 coats of ROCK CANDY in any 24 hour period.