Log In To View Price
605242CG5 SIGNATURE ROCK CANDY FLOOR FINISH 5GAL
- Availability: In Stock
- Stock #:660205
- Additional Description:
ROCK CANDY High Performance Durable Floor Finish - 5 Gal.
ROCK CANDY High Performance Durable Floor Finish - 5 Gal.
5 Gallon Pail
5 Gallon Pail
ROCK CANDY can be applied on all types of flooring, such as vinyl, terrazzo, marble (glazed and honed), quarry tile, ceramic, brick, concrete, rubber, and sealed wood.
FEATURES & BENEFITS:High Solids
Crystal Clear Film
Extremely Durable and Burnishable
Black Mark Resistant
COVERAGE: 2000-2500 sq.ft./gal. for proper film formation
FEATURES & BENEFITS:
STRIP & RE-COAT
(1) Dust mop entire area to be stripped.Remove gum labels and sticky waste with a scraper.
(2) Place “Wet Floor” signs around area to be stripped.
(3) Dilute recommended stripping solution according to label directions.
(4) Liberally apply stripping solution to the floor. Allow product to remain
on surface for 6-8 minutes.
(5) Manually scrub all corners and edges that the machine cannot reach.
(6) Scrub the floor with a machine equipped with appropriate stripping pad or brush. Do not allow stripping solution to dry onto floor. if this occurs, re-wet surface with stripping solution and scrub.
(7) Pick up the stripping solution with a wet vac.
(8) If a “Rinse Required” stripper was used, liberally apply clean rinse water to area just stripped. Recover with a wet pickup vacuum and proceed to step 9. If a “Rinse Free” stripper is used proceed to step 9.
(9) Damp mop area including all corners and edges with clean water. Allow floor to air dry thoroughly.
SCRUB & RE-COAT
(1) Dust mop entire area to be scrubbed. Remove gum labels and sticky waste with a scraper.
(2) Place “Wet Floor” signs around area to be scrubbed.
(3) Dilute recommended scrubbing solution according to label directions.
(4) Liberally apply scrubbing solution to the floor. Allow product to
remain on surface for 6-8 minutes.
(5) Manually scrub all corners and edges that the machine cannot reach.
(6) Scrub the floor with a machine equipped with appropriate stripping pad or brush. Do not allow scrubbing solution to dry onto floor. If this occurs, re-wet surface with scrubbing solution and scrub.
(7) Pick up the scrubbing solution with a wet vac.
(8) Damp mop area including all corners and edges with clean water. Allow floor to air dry thoroughly.
COAT
(1) Presoak finish mop in clean, cold water to remove lint. (Do NOT use any mop that has been contaminated with cleaner or stripper).
(2) Place a clean plastic liner into a mop bucket equipped with a wringer. Pour ROCK CANDY into plastic liner.
(3) Submerge the mop into finish and wring out until drip free.
(4) Frame off an area by drawing the mop in a straight line 4 inches out from all edges.
(5) Fill in framed section applying finish in a figure 8 pattern. Rewet mop as needed to apply at the rate of 2,000 square feet per gallon.
(6) Follow these procedures and apply first coat of ROCK CANDY to the entire floor
and allow to air dry thoroughly.
(7) Apply a second coat and all additional coats of finish following procedures outlined in steps 4 through 6. For final coat only, apply finish up to all edges and allow to thoroughly dry.
NOTE: Do NOT apply more than 3 coats of ROCK CANDY in any 24-hour period
SCRUB & RE-COAT
COAT
NOTE: Do NOT apply more than 3 coats of ROCK CANDY in any 24-hour period
Also Purchased
Products to consider when purchasing this item